Article

Corrosion is the degradation of a material as a result of its interaction with its surroundings and usually results in converting a refined metal into a more chemically stable oxide with a loss [...]

An oversize load refers to the movement of a large load that requires a vehicle that is wider, heavier, higher, or longer than a standard road vehicle, and is subject to specific regulations.  [...]

A pressure vessel is a container designed to hold gases or liquids at a pressure that is substantially different from ambient pressure. Pressure vessels can be dangerous and pressure vessel [...]

A pressure vessel is a closed container designed to hold gases or liquids at a pressure that is substantially different from the ambient pressure. Types of pressure vessels vary according to [...]

Different types of welding processes  In this series, we look at the different types of welding processes used by A&G Engineering in its fabrication processes.    Plasma Arc Welding  [...]

Different types of welding processes  In this series, we look at the different types of welding processes used by A&G Engineering in its fabrication processes.  Metal Inert Gas (MIG) Welding  [...]

  A Material Test Certificate (MTC) is a quality assurance document used in the metals industry that acts as a certified record of a material’s chemical and physical properties and [...]

All pressure vessels that are designed to AS1210 requirements must be pressure tested in accordance with AS4037 after fabrication and inspected to demonstrate their structural integrity before [...]

Once product design and specification has been finalised with the client, responsibility for on-time, on-budget, and as-specified delivery rests with the A&G production team.  The fabrication [...]

The start of 2020 brought huge challenges for Australia. A major drought was followed by devastating bushfires when the COVID-19 outbreak began. The Government acted quickly to close borders and [...]